Bearing guided cutters are suitable for both straight and curved work, bearings are normally fractionally larger than cutter diameter, to avoid surface scoring.

Uses:
Trimming plastic or plywood overlay.
Copy profiling – use the bearing to follow a template or base edge of board.

A 3 mm approximate overlap should be left before copy profiling, also when using plastic laminate always allow laminate adhesive to dry before trimming. This avoids clogging the guide bearing.

Tooling Tungsten Carbide
1/4in Shank.

Angle A = 90°
D = 6.3 mm
C = 12.7 mm

Product enquiry form

Corners will require a final trimming square with a hand chisel or a corner chisel. Suitable for abrasive materials such as chipboard, MDF, plywood, hardwoods and hard plastics.

This Trend 4/1 x 1/4 TCT Two Flute Cutter has the following specification:

D: 15mm (19/32in)
C: 25mm
OL: 51mm
Shank Diameter: 1/4in

Product enquiry form

Corners will require a final trimming square with a hand chisel or a corner chisel. Suitable for abrasive materials such as chipboard, MDF, plywood, hardwoods and hard plastics.

This Trend 3/8 x 1/4 TCT Two Flute Cutter has the following specification:

D: 12mm (15/32in)
C: 19mm
OL: 51mm
Shank Diameter: 1/4in

Product enquiry form

Extra care must be taken to avoid breakage. Take more passes than usual and only cut up to half the diameter of the cutter in one pass.

C = 12 mm
D = 19 mm 15/32 in
OL = 66mm

Product enquiry form

Corners will require a final trimming square with a hand chisel or a corner chisel. Suitable for abrasive materials such as chipboard, MDF, plywood, hardwoods and hard plastics.

This Trend 3/85 x 1/2 TCT Two Flute Cutter has the following specification:

D: 12.7mm (1/2in)
C: 63mm
OL: 115mm
Shank Diameter: 1/2in

Product enquiry form

Corners will require a final trimming square with a hand chisel or a corner chisel. Suitable for abrasive materials such as chipboard, MDF, plywood, hardwoods and hard plastics.

This Trend 3/83 x 1/2 TCT Two Flute Workshop Cutter has the following specification:

D: 12.7mm (1/2in)
C: 50mm
OL: 108mm
Shank Diameter: 1/2in

For use with professional routers that have a 80mm deep plunge. One piece multi-slit collet to ensure safe cutter retraction into base. Designed for hollow honeycomb board worktops.

Product enquiry form

Corners will require a final trimming square with a hand chisel or a corner chisel. Suitable for abrasive materials such as chipboard, MDF, plywood, hardwoods and hard plastics.

The Trend 3/83D x 1/2 TCT Two Flute Workshop Cutter is especially suited for drilling. It has the following specification:

Cutting Diameter: 12.7mm (1/2in)
Cutting Depth: 50.0mm
Overall Length: 99mm
Shank Diameter: 1/2in

Product enquiry form

Corners will require a final trimming square with a hand chisel or a corner chisel. Suitable for abrasive materials such as chipboard, MDF, plywood, hardwoods and hard plastics.

This Trend 3/81 x 1/2 TCT Two Flute Cutter has the following specification:

D: 12.7mm (1/2in)
C: 32mm
OL: 74mm
Shank Diameter: 1/2in

Product enquiry form

Corners will require a final trimming square with a hand chisel or a corner chisel. Suitable for abrasive materials such as chipboard, MDF, plywood, hardwoods and hard plastics.

This Trend 3/6 x 1/4 TCT Two Flute Cutter has the following specification:

D: 10mm (25/64in)
C: 19mm
OL: 51mm
Shank Diameter: 1/4in

Product enquiry form

Corners will require a final trimming square with a hand chisel or a corner chisel. Suitable for abrasive materials such as chipboard, MDF, plywood, hardwoods and hard plastics.

This Trend 3/2 x 1/4 TCT Two Flute Cutter has the following specification:

D: 6.0mm (15/64in)
C: 16mm
OL: 48mm
Shank Diameter: 1/4in

Product enquiry form